Menu

LAN Switching & Wireless

Home / LAN Switching & Wireless

Web Managed/ Smart Switch

  • Cost effective alternative to  fully managed switch
  • configuration and management using web based GUI (no CLI access)
  • supports basic QoS, ACL, 802.1x authentication
  • allow basic configuration, such as VLANs, port-bandwidth, duplex mode etc
  • support 100 Mbps & 1 Gbps
  • suitable for SMB & as edge/access switch
  • available in 8/16/24/48 port models

L2 Managed Switch

  • provides the best application experience, the highest levels of security, precise control and management of the network
  • engineered for converged voice, video and data networking
  • supports Industry standard command line interface (CLI)
  • Layer 2+ features with static routing
  • Increased packet buffering, low latency & Jumbo frame support
  • IPv6 support with multicasting
  • usually deployed as distribution/access switches
  • available in 24/48 port 100 Mb and 1G with 1G/10G uplink ports

Layer 3 managed Switch

  • Advanced Layer 2, Layer 3 and Layer 4 feature set
  • Modular & Stacking architecture – helps scalability
  • Used as Core or Central switch in medium and large networks
  • Supports high density 1G/10G/40G fiber downlink ports for campus network
  • 1G/10G copper ports- provide connectivity to server farm & Data centre devices
  • Supports Hot swapable components- RPS, Fan
  • Comprehensive IPv4/IPv6 static and dynamic routing
  • Standard RS232 serial RJ45 and USB ports for local management console

PoE Switch

  • provides power & network connectivity for PoE powered devices over a single LAN cable
  • Useful for Wireless AP, IP phone, IP camera, Biometric reader, Thin client, IP speaker, Video receiver/decoder & other IoT devices
  • Transmits centrally available UPS power to endpoints – increasing reliability
  • Available in web managed/ L2 managed versions
  • Supports 802.3af(15.4W), 802.3at(30W) , 802.3bt (60W, 90W) and HD Base-T standards
  • Over current & Short circuit protection
  • Available in 8/16/24 port models supporting wide range of PoE power budget
  • Long distance PoE support upto 250mt on selected models

PoE Injector & Midspan PoE Switch

  • Helps existing LAN switches to be used while adding PoE feature
  • Single port device is popularly known as PoE injector
  • Multi port device is known as Midspan PoE switch
  • Available in 8/16/24 port models supporting wide range of PoE power budget
  • Supports 802.3af(15.4W), 802.3at(30W), 802.3bt (60W, 90W) and HD Base-T standards

Wireless Access Point

  • Indoor ceiling/wall mount access point
  • Multi directional antenna design for effective signal propagation
  • Standards support: IEEE 802.11 a/b/g/n/ac – wave1/ wave2
  • Supported frequency: 2.4 GHz, 5 GHz
  • Radio stream: 2x 2:2 and 3x 3:3 MIMO
  • Antenna Gain: upto 3dBi
  • Peak Transmit power: 25dBm@2.5GHz; 24dBm@5 GHz
  • Minimum Receive sensitivity: -99dBm
  • Peak data rate: upto 1.7 Gbps
  • SSID: upto 8/16 per AP
  • Concurrent user: upto 250/ AP
  • Interface: Gigabit PoE+

Wireless Controller

  • Software based controller for cost effective campus wide Wireless LAN
  • RF tool to monitor & analyse optimal AP placement, configuration & troubleshooting
  • Creation of multiple WLAN group and AP’s radio
  • Enables seamless roaming across the campus with single sign on
  • Support for guest portal with user authentication to isolate from business network
  • Advanced QoS support for per-user rate limiting
  • WiFi Multi Media (WMM) traffic management

Wireless Bridge

  • Outdoor rated bridge for Point to Point(PtP) & Point to MultiPoint(PtMP) application
  • Operating frequency: 2.4 & 5 GHz
  • Interface: Gigabit PoE
  • Throughput: 450 Mbps
  • Designed for data, voice & video traffic
  • support for long distance over Line of Sight(LoS) & near LoS
  • Mounting: pole/ wall mount